XENO XIPDC1080-4e, User Manual, Page: 57 / 67

57
RTP
Port Range:
The RTP Port range defines the range of ports from which the video/audio
ports are automatically selected. This feature is useful if the camera is connected to a NAT
router with manually configured port mapping.
NOTE
Limit the range of ports permitted for RTP unicast/multicast by entering the Start port and
End port in the provided fields.
Start port:
The Start port can be entered in the range 1024-65532. The default setting is
5008.
End port:
The End port can be entered in the range 1024-65532. The default setting is
50999.
NOTE
The video/audio ports entered here must be even values.
Multicast-Stream1~3:
Only IP addresses within certain ranges can be used for multicasting. The camera has been
pre-configured with addresses from these ranges, and does not normally need to be
reconfigured. If an address does need to be changed, please contact your network