XENO XIPDC1080-4e, User Manual, Page: 36 / 67

36
Motion Detection
Motion Detection:
Motion detection is used to generate an alarm whenever
movement occurs (or stops) in the viewer. A total of 8 Motion and/or Mask windows can be
created and configured.
Sensitivity:
Configure the sensitivity for the motion detection.
Once motion detection windows are configured, this camera can be configured to perform
actions when motion is detected.
Possible actions include uploading images, alarm out and E-mailing.
To create a motion or mask window, follow steps:
1. Click the right button of mouse to see the mouse menu.
2. Select New Motion (or Mask) Window in the mouse menu.
3. Click and drag mouse to designate a motion area.
• Include windows — define areas where motion should be detected
• Exclude windows — define areas within an Include window that should be ignored
• Threshold: Configure the threshold for the motion detection.
• Dwell Time: Configure the hold time an event lasts for the specified hold time
from the point of detection of a motion.
To exclude parts of the include window, select the Configure excluded window and position
the exclude window within the include window.
To delete an include window or exclude window, select the window in the list of windows
and click Delete.