XENO XIPDC1080-4e, User Manual, Page: 28 / 67

28
Day/Night
Day & Night Control:
The IR cut filter prevents infrared (IR) light from reaching the
image sensor. In poor lighting conditions, for example at night, or when using an IR lamp,
set the mode to Night. This increases light sensitivity and allows the product to “see”
infrared light. The image is shown in black and white when the mode is Night. If using
Automatic Exposure control, set the mode to Automatic to automatically switch between Day
and Night according to the lighting conditions.
Mode:
Configure as one of Automatic, Day, Night and External mode to transit an IR cut
filter. The default setting is External.
Switching Time:
Configure the switching time of an IR cut filter transition for the
specified dwell time from the point of transition detection.
Smart IR:
Smart IR is a intensity of the camera’s infrared LEDs to compensate for the
distance of an object so that the infrared does not overexpose the object.
Select the on/off the Smart IR.