XENO XDR4 range Installation And User Manual Download Page 40

Page: 40 / 128

39 | Chapter 1 : DVR User Manual

4.1

System

The system menu button is selected by clicking

“TOOL” on the menu bar or clicking the right mouse button.

Users can move mouse pointer from

“System” through “Quick Setup” to instantly look around the sub-menus on the menu

screen. Using the left mouse button, the user can select a desired category for editing.

4.1.1 System Info

Use this submenu to check system information status or to change the system-related configuration.

Users can then move to other sub-menu of the System; System Info, User, Export/Import, HDD, and Factory Default by
moving mouse pointer or pressing the front arrow buttons.

Mac address is a unique network identification number for each system.

NTSC/PAL is convertible by moving the selection switch on the rear panel of the system and rebooting.

Summary of Contents for XDR4 range

































































































































Search results

Summary of Contents for XDR4 range

Reviews:

Related manuals for XDR4 range

Brands by name

Popular brands

XENO XDR4 range, Installation And User Manual

Search results

Summary of Contents for XDR4 range

Reviews:

Related manuals for XDR4 range

Brands by name

Popular brands