XENO XDR4 range Installation And User Manual Download Page 97

Page: 97 / 128

User’s Manual | 96

7.3.2 Main Toolbar

No.

Button

Description

Site Manager

Connect

Connect to a site that is listed on the DVR list panel
( Select Live and Search mode at Connect Mode Panel )

Disconnect

Disconnect a selected channel

Disconnect All

Disconnect All Channels

Print out still image

JPG Export

Save a selected image to the desktop as JPEG format

Movie Export

Save a selected video clip to the desktop as mov format

Split

Single Channel, 4-Split, 9-Split, 16-Split

7.3.3 Site List Panel

The site list panel shows registered DVR lists. To connect, Drag & Drop the site.

Before you connect the site, Select the Live or Search mode first in the connection mode panel.

16 different On-Screen DVR, a mixture of different connection modes can be monitored.

Summary of Contents for XDR4 range

































































































































Search results

Summary of Contents for XDR4 range

Reviews:

Related manuals for XDR4 range

Brands by name

Popular brands

XENO XDR4 range, Installation And User Manual

Search results

Summary of Contents for XDR4 range

Reviews:

Related manuals for XDR4 range

Brands by name

Popular brands