2)
Main
If Event Popup is Off, you can set DVR to sequence cameras.
If Event Popup is On event channel screen appears
If Event Popup is On, event channel screen appears.
OSD
MAIN
SPOT
VGA
SEQUENCE MODE
FULL 1 Ch
SEQUENCE MODE
SEQUENCE INTERVAL
EVENT POPUP
POPUP EVENT TYPE
POPUP DWELL
FULL 1 Ch
2
ON
MOTION
2
SECOND
SECOND
SAVE
DEFAULT
CANCEL
POPUP DWELL
2
SECOND
PIP
DURATION
7
2
SECOND
-
Sequence Mode
: Define layout to sequence between Full 1ch and 4ch split.
-
Sequence Interval
: Set interval among 1, 2, 3, 4, 5, 10, 15, 20, 30 seconds.
-
Event Popup
: Select On or Off for pop up screen in case event occurs.
-
Popup Event Type
: Select Event type between motion detection and Alarm.
-
Popup Dwell
: Set dwell-time among 1 2 3 4 5 10 15 20 30 seconds
SAVE
DEFAULT
CANCEL
<Note>
In case events (Motion or Alarm) occur on several channels at the same time,
Popup Dwell
: Set dwell time among 1, 2, 3, 4, 5, 10, 15, 20, 30 seconds.
-
PIP
: Set location of insert window (Upper part :0~2, Middle part: 3~4, Lower part: 5~7 )
-
Duration
: Switching interval for PIP insert window. (1,2,3,4,5,10,15,20,30)
channel 1 has the first priority to pop up.
Ex)
If events occur on channel 1, channel 2 and channel 4 at the same time, channel 1 appears.
Only when pop up of channel 1 ends will channel 2 appear for the set dwell-time.
However, even when motion is detected on channel 1 again within the dwell-time of channel 2, pop up
of channel 2 stays in display.
If motion is still detected on channel 1 after dwell time channel 1 appears again
If motion is still detected on channel 1 after dwell-time, channel 1 appears again.
42
