Spy Clock DVR with motion detector (4GB)
Model # DVR520
Instruction Manual
Thank you for purchasing our company’s
products! This product is a high
-
definition
digital camera with motion detection and photo
-
shooting capabilities. It is also a working clock.
It has TF card memory with 4GB capacity.
Before using this product, please carefully read
this user manual. The features are presented in
Figure 1 below.
Back View
Front View
Figure 1: Appearance and buttons
1. USB Port
2. TF card slot
3. On / off button (between 1 and 2 on the
clock face) (K1)
4. Picture / Motion
-
detection camera button
(between 10 and 11 on the clock face) (K2)
5. Clock adjustment knob
6. Camera (above the “12”)
7. Indicator Light (under the “6”)
I. Operation instructions
A. Turning the unit on and off.
The on/off button (K1) turns the unit on
and off. To turn the unit on, press and
hold the on / off button (long press) and
release it when you see the red light
comes on. . When the red light goes out
and the green light stays on, the unit is
on and in DVR standby mode. While in
DVR standby mode and no other input,
it will shut off after 1 minute. Note: You
must wait until the unit is in DVR
standby mode before selecting any
different mode.
To save files and turn the unit off, press
and hold on/ off button until the red
light starts to flash. The indicator light
will flash the red light three times, then
power off.
B. Recording Video
Insert the TF card. Place the unit in
DVR standby mode by turning the unit
on.
Press the on/off button (K1) and release
(short press) once to enter video camera
mode. The green indicator light will
flash six times and go out. The unit is
now recording video. To save the video
file and stop recording video simply
quick press the on/ off button again and
the green LED indicator will come back
on (DVR standby mode). Files will be
saved every 5 minutes during camera
operation.
C. Recording Motion Detection Video
Insert the TF card. Place the unit in
DVR standby mode by turning the unit
on. If you want to use motion detection
long press the photo/motion
-
detection
button (K2), release the button when the
red indicator light will flash six times
and go out. The camera is now in
motion
-
detection mode. It will come on
when it detects movement, record, and
shut off when there is no more
movement detected. The unit will start
to record as soon as the red light starts
to flash and continues to record from
additional 30
-
45 seconds after no further
motion is detected before returning to
motion detection standby. Press and
hold the on/ off button to turn the
camera off. The red light will flash three
times and go off.
Note: Quick press the on/ off button to
return to the DVR standby mode.
D. Taking Photos
Insert the TF card and place the unit in
standby mode.
Press the picture button (K2) and release
to take photos. The green indicator light
will flash once and go out each time a
photo is taken and the photo will be
saved to the TF card. You cannot take
another picture until the green indicator
is back on
E. USB Connection
A USB cable is included for connecting
the unit to a computer for viewing files
and for charging the unit.
1. In order to view files, make sure the
unit is OFF and the TF card is installed.
Plug into the computer using the USB
cable. If it does not open automatically,
go to “My Computer” and click on the
removable disk drive, usually “E”. Open
the
“DCIM”
folder,
then
the
“100DSCIM” folder. Your pictures and
videos will be displayed for you to
double click and view.
