INSTALLATION & SAFEGUARDS
All the safety and operating instructions should be read before operation.
All the safety and operating instructions should be read before operation.
Environment Condition for Installation
1. To prevent electric shock or other hazard, do not expose this unit to rain, moisture or dust.
2. Place this unit in a well-ventilated place and do not place heat-generating objects on this
unit.
3. This unit should not be located in an area where it is likely to be subjected to mechanical
shocks.
Before You Start
1. Ensure the power switch is in the OFF position prior to installation.
2. Opening or removing the cover may expose you to dangerous voltage or other hazards.
3. Operate this unit within the range of room temperature and humidity.
4. Supply power through the type of power source indicated on the manufacturer’s label and
ith th
l i l d d i thi
it
with the power supply included in this unit.
5. Keep this unit out of direct sunlight and heat.
6. Make sure conductive material does not go into the fan hole.
Notice
1. Before initial configuration or operation, first set TIME/DATE and then set this unit to the
FACTORY DEFAULT setting and finally clear the HDD Follow these steps in order
FACTORY DEFAULT setting and finally clear the HDD. Follow these steps in order.
Otherwise it may cause the HDD not to record or save setting value. Or it may record, but
you will not be able to search recorded data.
2. This unit is compatible with large sized HDD.
3. When setting RECORDING SETUP after installation, always set RECORD
CONFIGURATION and SCHEDULE SETUP. Setting Schedule setup is necessary as this
unit records according to Record type & Schedule setup. The default setting value for
Schedule setup is Continuous mode.
Sc edu e setup s Co t uous ode
4. Stop recording before powering off this unit by entering setup menu. Powering off while
recording may cause critical malfunctions such as Recording Error, Playback Error or System
Error.
CE Mark
A Declaration of Conformity in accordance with the following EU standards has been made.
f
The manufacturer declares that the product supplied with this document is compliant the
provisions of the EMC Directive 89/336 EEC, the Low Voltage Directive LVD 73/23, the CE
Marking Directive 93/68 EEC and all associated amendments.
2