21
20
The BlaCK eanX enables operation in three operation modes:
•
Gauge (BT)
– measurement mode. The device does not calculate no-decom-
pression time (nDl) and decompression stops.
•
AIR
– air computer mode. The device shows nDl time and decompression
stops using only air (21% of oxygen, 79% of nitrogen) for calculations. There is
no possibility to switch gas under the water.
•
EANx
– simplified nitrox computer mode with the conservatism settings based
on three presets. The device shows nDl time and decompression stops. There
is a possibility to configure up to 3 breathing gas mixtures and switch gases
under the water.
•
Adv. EANx
– advanced nitrox computer mode with the conservatism settings
based on direct settings of the Gradient Factors. The device shows nDl time
and decompression stops. There is a possibility to configure up to 3 breathing
gas mixtures and switch gases under the water.
SELECTION OF DEVICE
OPERATION MODE 1/2
attention! The adv.eanx mode is recommened only for advanced
users, who know and understand Gradient Factors. Other users are
recommened to use eanx mode, which provides the same function-
ality, but the conservatism is set using three preset values.
The current operation mode is shown on the main screen of the surface mode:
You can change the current mode with the use of function
Settings >> Mode
in
main menu of the device.
SELECTION OF DEVICE
OPERATION MODE 2/2
04.06.15
16:52
Surf.time: 1:20
Mode: EANx
starting the dive with Gauge (BT) mode in the device will result
in blocking the possibility to change the mode into aIr or eanx
for 48h since the completion of the dive.
CUrrenT mODe
