XE210C Hydraulic Excavator
Operating and Maintenance Manual
66
Operating procedure
Operating environment
Operating lever
1. Left control handle
3. Right control handle for the crawler
2. Left control handle for the crawler
4. Right control handle
Traveling pedal
Warning!
Except the machine moves, do not put your feet on the pedal, if you put your feet on the pedal and
step by mistakes, the machine will move suddenly and cause serious accidents.
When the track frame is installed towards the rear part, the machine will move in the reverse direction
of moving forward and the heading direction of the reverse moving.
When using the operating lever, check the track frame is towards the rear part or the front part. (If the
chain wheel is in the rear part, then the track frame is towards the front part.)
When using the pedal for operating and moving, special attention should be paid.
The operating levers (2
，
3) are used to exchange the moving
directions of the machine.
The operations for the pedal are described in ( ).
(a)
Moving forward: push the operating lever forward (the pedal
will tilt forwards);
(b)
Reverse moving: pull the operating lever backwards (the
pedal will tilt backwards):
N (middle position): the machine stops
