XE210C Hydraulic Excavator
Operating and Maintenance Manual
148
Appendix
Crawler type and application
Choosing the track shoe meet the operating requirements.
According to the floatability and grounding pressure to choose the width of the track shoe, choosing the
narrowest track shoe possibly. If the used track shoe is wider than needed, it will increase the load of the
track shoe, and lead the track bend, link broken pin-axis broken, loosen of the track shoe and other kinds of
problems.
List 4-3 Crawler use table
Type
Use
Notices when using
A
Stony ground, riverbed,
common earth
If the ground has big obstacles, like cobble, down-tree and rough ground, using the
low speed to travel.
B
Common earth, and soft
ground
Only can use the high speed and medium speed on the level ground; if passing the
obstacles can not be avoided, slow down the machine and use the half speed of the
low speed to travel; can not be used on the rough ground with cobble and
down-tree.
C
Extra-soft ground
（
marshland
ground
）
Only use this type when the machine sink and the places where the type A and B
can not be used.
List 4-4 Track shoe type table
XE210C/XE210C3
Ⅶ
/XE210C2/XE210C2
Ⅶ
Technical specification
Type
Standard
600mm three grousers track shoe
A
Selective
purchasing
700mm three grousers track shoe
B
Selective
purchasing
800mm three grousers track shoe
C
Attention
：
700, 800mm width track shoe can not be used on the ground with lots of gravels and
stones.
