XciteRC X-6S, User Manual

Page: 33 / 80

33 50500000 Sender X-6S
4 , 8 V F 1 0 0
TIMER
00.00 F U N .
S Y S .
.
T H R O H O L D
4 , 8 V F 1 0 0
TIMER
00.00 F U N .
S Y S .
.
I D L E O N
4 , 8 V F 1 0 0
TIMER
00.00 F U N .
S Y S .
.
TH.HOLD
IDLE
45
45
EN
Basic functions
Basic features
• Pitch neutral trim;
• 0utput standard 6 channel signal and support 2.4G System.
• Support 3D fly mode: normal fly, idle 1 fly and idle 2 fly (In the idle mode)
• D/R for Aileron. Elevator. Rudder;
• Throttle hold function;
• Gyro sensitivity adjustment;
• Channel neutral position setting
• Channel reverse and channel servo travel adjustment;
• Six models data memory;
• POWER LED will blink with alarm when the voltage is below 4.0 V.
Main function Interface
Voltage
Function
System
Handle
HV.TH
TH.Hold (Heli)
CH6 (Flugmodell)
GYRO.SENS. (Heli)
CH5 (Plane)
Digital trim
Right
Stick
Digital trim
INC (Timer-Start)
Charging jack
DEC (Timer Reset)
ENTER
Model memory
Timer
LED displaying board function_
“POWER” LED is blue
POWER” LED
• The light keeps on with blue color in normal power-on condition.
• When the voltage is below 4.0 V, the light blinks with alarming. Now please exit the operation and change
new battery.
Note
If “HOLD ON” is shown on LCD when you turn on the power, please move “TH HOLD” switch to the position
0, otherwise, you can not properly enter power on interface.
If “IDLE ON” is shown on LCD when you turn on the power, please move “IDLE” switch to the position N,
otherwise, you can not properly enter power on interface.
If “THRO STICK“ is shown on LCD when you turn on the power, move the throttle stick to front position,
otherwise, you can not properly enter power on interface.