24 Copyright | C6EU SERIES Installation and Operation Manual, Version 1.6
The charging station can also Alternatively be transported and aligned by crane. This can
be achieved through four eyebolts included in delivery, which can be screwed into the
tapped holes on the top.
Notes:
•
Only 60kW and 120kW C6EU are supposed to be transported by crane for a short
distance (for example from floor to Foundation). For more than 150kW because of the
weight forklift is suggested by XCHARGE to apply. Please ensure that the body of C6EU
stays stable during moving through crane or forklift to avoid the possible swinging,
which may cause damage to the charger;
•
The cable entrance on the bottom of charger is divided into three inlets, of which the
first is for the power cable, the second is for the LAN cable and the third is for the
signal cable. In order to prevent animals from entering the charging station to cause
unnecessary damage, it should be sealed with a barrier plate and three waterproof
cable glands.
Figure 4.6.2 Dimension of Cable entrance and glands
WARNING
Mortal danger due to electrocution!
The contact with high power parts can result in electric shock, burns or death. Before
working please put on the required protection device such as protective clothing and
gloves.
-
Disconnect the system from the power supply.
-
Make sure that the power supply is disconnected while working.
After opening the front door and removing the cover, please connect the 3 phase cables L1,
L2, L3 and the neutral conductor N as well as the PE protective conductor to the busbar.
Then check the connection carefully. Tighten all terminal screws to complete the
Summary of Contents for C6EU
Page 1: ...C6EU SERIES Installation and Operation Manual ENGLISH ...
Page 2: ......
