6
Installing Batteries
The Windows Touch Pen runs on two SR41 batteries. To install the
batteries, follow these steps:
1.
Unscrew the rear cap.
2.
If necessary, remove the old batteries by holding the pen upside
down and gently manipulating the metal tab.
3.
Insert fresh batteries with the positive terminal facing up. Make sure
the batteries are fully inserted.
4.
Screw the rear cap on until secure.
Replacing the Brush Tip
The Windows Touch Pen comes with a replacement brush tip in the event
that the original one wears out. To replace the brush, follow these steps:
Before You Start
WTP Manual.indd 6
12/20/13 9:54 AM
