Xblue Networks Xplus100 User Manual Download Page 87

Page: 87 / 121

XBLUE Networks

Telephone Operation

Night M

ode/Ac

tiv

2. Press

Mute

again to cancel. The display momentarily shows:

Operational Notes

•

When mute is active the LED and the status bar are lit solid.

Night

Mode/Active

Feature Code: Feature

Description

The attendant extension can select between Day, Night and Timed modes. These modes are

designed to accommodate special ringing requirements for Day and Night. Timed mode is used to

automatically switch between Day and Night modes. If the system is put into Day or Night modes,

the system will remain in that mode until is it placed into another mode or put back into timed

mode.

Default Settings:

The system is in Day mode. The time switching settings, which control the “timed” mode is set

from 9:00 am to 6:00 pm Monday through Friday. The system remains in night mode on the

weekends.

Operation

Change Service Mode

1. At the attendant or alternate attendant extension:

DEC 31 FRI 11:58
MUTE INACTIVE

Summary of Contents for Xplus100


























































































































Search results

Summary of Contents for Xplus100

Reviews:

Related manuals for Xplus100

Brands by name

Popular brands

Xblue Networks Xplus100, User Manual

Search results

Summary of Contents for Xplus100

Reviews:

Related manuals for Xplus100

Brands by name

Popular brands