– 16 –
Features subject to change without notice
V1
Preset Call Forward (CO)
Regardless of where a CO line rings, it can be preset forwarded to a single destination, such as
another station, UCD or voicemail group. Unlike predefined call forward, preset call forward will
not function after the CO line has been transferred. This type of forwarding is very helpful when
using tenant services within the system.
Private Line
The private line assignment provides a quick and secure method of programming one or more
CO lines for access by only one extension. The private line is used exclusively by the extension
that is assigned in the “private to” extension in database programming.
Privacy / Privacy Release (Intrusion)
All calls within the system are considered private. Therefore no other extension can simply push a
button and join in on an existing conversation unless privacy is disabled. Once privacy has been
disabled other extensions can press the CO line button and join in on an existing conversation.
Unless otherwise programmed, the system will play a tone whenever a new called joins in on an
existing conversation.
Privacy Tone Cancel (Intrusion Tone Cancel)
The privacy tone can be disabled. If the tone is disabled, no tone will be played when an
extension joins an existing conversation.
Programmable Button Assignment
The PCS Digital telephones have twenty programmable buttons. Each programmable buttons can
contain any of the systems’ features.
Programmable Ring Assignment
Incoming central office lines can be programmed to ring and one or more extensions or to a UCD
or voicemail group.
Pulse / Tone Conversion
By dialing a code CO Lines can be converted from using Pulse dialing to DTMF touch tone
dialing. This is especially helpful when integrating with older Central Offices.
Record – All Call
In the suite 64 up to eight extensions can be programmed into an all record group. All
conversations at these extensions will be recorded. However, the recordings will not be saved
unless the extension user presses a key prior to placing the call on hold or hanging up
Relay Contacts
Each system provides one (dry) contact closure for interfacing with ancillary devices. This
contact closure is rated at 24 volts DC one amp.
Release key
The release key releases all calls from the extension, and brings it back to an idle condition.
Regardless of the placement of the handset, the telephone will be idle. This can be helpful when
using a headset.
