– 13 –
Features subject to change without notice
V1
Intercom Key
An Intercom Key is used by extension users when they wish to invoke specific intercom features.
For example, If the user wishes to make an intercom call, after answering an incoming central
office call, they must press the intercom key or the system will try to transfer the CO line call.
Interactive Display
The 31-button telephone and wireless handset have interactive displays, which interact with the
three soft buttons found below the display. These buttons are used to assist with feature
operation and programming.
Internal MOH
The Internal music on hold consists of simulated music that can be played to callers that are on
placed on hold.
Intrusion
Intrusion allows extensions to join-in on an existing. There is also a programmable intrusion tone,
which by default is enabled. This is most commonly used when training UCD agents.
Last Number Redial (LNR)
Last Number Redial is used to press one button or dial a code for quick access to the last number
dialed from that extension.
Loud Bell
The system provides one dry contact closure for interface to an external device such as a Loud
Bell or strobe light device. This closure can be associated with an incoming CO Ling ringing
triggering the contact closure, activating the loud bell or strobe light when an incoming call is
ringing.
Meet Me Page
Meet me page allows a station user to dial a code from any extension within the system and be
connected to the person that just completed a page. Once the call is established the paging port
is released, and the two can converse privately.
Memo Pad
While on an internal or external call extension users can enter a telephone to be dialed later. Dial
the memo pad code, and enter the telephone number as it will be dialed, add 1 for long distance.
When needed, dial the same code from the idle extension to place the call.
Message Waiting
Message waiting is a visual indication sent by the calling party, which can be as simple as a
flashing light or as complex as a message in the display of a 31-button or wireless handset.
When the called party becomes idle or returns to the extension, simply presses the “Reply” button
to return the call. Message waiting on single line ports is an audible stutter dial tone. When a
single line device goes off hook, it will receive 3 seconds of stutter dial tone.
