X7968r
User’s Guide
Attribute
Value
Whip
Possible Values if compiled for Whip Serial:
Serial or Inactive
Possible Values if compiled for Whip TCP:
TCP or Inactive
Possible Values if compiled for Whip Serial/TCP:
Serial, TCP or Inactive
Indicated state of whip. Possible values are
Inactive, SerialActive and TCPActive
Whip Active
An action given when ActivateLine is set to Start.
Possible values are Startup, SpectrumReverb,
SpectrumMedely or SpectrumPilot
Action
Standard
Indicates the preferred standard compliance.
Multimode
indicates that the device
automatically detects the other end as one of the
supported standards.
Utopia Interface
Level1 – Utopia Level 1 internal framing is used
with the DSP
Level2 – Utopia Level 2 internal framing is used
with the DSP
EC FDM Mode
EC – enables Echo Cancellation. This setting is
necessary if your device is connected to a high
speed CO.
FDM – enables Frequency Division Multiplexing
The maximum number of bits per bin. This can
be any value between 1 and 15
Max Bits Per Bin
A value that indicates the lowest bin number
allowed for transmit signal
Tx Start Bin
A value that indicates the highest bin number
allowed for transmit signal
Tx End Bin
A value that indicates the lowest bin number
allowed for receive signal
Rx Start Bin
Rx End Bin
A value that indicates the highest bin number
allowed for receive signal
Rx Auto Bin Adjust
Disable – the bin settings configured as the
RxStartBin/RxEndBin parameters are used
Enable – DSP automatically adjusts the bin
selection for receive signal
Tx Attenuation
A value between 0dB and 12dB that indicates
the transmit power attenuation
Bit Swap
Disable – disables the adjustment of the
number of bits assigned to a subcarrier without
interrupting data flow
Enable – enables the adjustment off the number
of bits assigned to a subcarrier without
interrupting data flow
A value that sets the maximum downstream rate
for those applications where it is necessary to
limit the downstream data rate
Max Down Rate
Physical Port
A value between 0 and 14 that sets the Utopia
Level 2 Utopia address
Retrain Disable
–
disables full retrain capability
Enable – enables full retrain capability
81
