background image

AR396 User’s Guide 

 

8

 

Getting Start with the Web pages 

The device includes a series of Web pages that provide an interface to the software installed 
on the device. It enables you to configure the device settings to meet the needs of your 
network. You can access it through a web browser on a PC connected to the device. 

Accessing the Web pages 

To access the web pages, you need the following: 

A laptop or PC connected to the LAN or WLAN port on the device.

 

A web browser installed on the PC. For the best display quality, use latest version of Internet 
Explorer, Netscape or Mozilla Firefox

.

from any of the LAN computers, launch your web 

browser, type the URL, 

http://192.168.1.1

 in the web address (or location) box, and press 

[Enter]. The default IP address of the device is 192.168.1.1. Then enter the default username 
and password: admin/admin to access the configuration web page, if you have not changed 
the username and password. Please be informed that strings of username and password are 
case-sentitive. 

 

 

Figure 5: Login Page 

 

The Menu comprises: 

Device Information:

 provides the basic information of the system. It includes sub menus, 

Summary, WAN, Statistics, Route, ARP and DHCP. 

 

 

 

 

 

 

 

 

 

Summary of Contents for AR396













































































Reviews: