AR396 User’s Guide
22
To configure the Bridging settings:
Check
“
Enable Bridge Service
” to enable bridge service
Enter
the
Service Name
for this bridging interface.
Click
Next
The
WAN Setup Summary
page shows all of parameters. Click
Save
if correct and click
Back
to restart the configuration again.
LAN
Figure 25: LAN Configuration
To configure LAN:
Enter the
IP address
which the CPE in the LAN will use to connect to the device. For
example, enter 192.168.1.1
Enter
the
Subnet Mask
. For example, enter 255.255.255.0
Check to enable UPnP feature
Check
to
Enable IGMP Snooping
. This feature will snoop all of IGMP packets and record
