AR396 User’s Guide
21
IP over ATM (IPoA)
Figure 23: WAN Connection, MER Configuration
To configure the IP over Ethernet settings:
Enter
the
WAN IP address
and
WAN Subnet Mask
.
Select “
Use the following default gateway
” and then also enter the
gateway IP address
and
Use WAN Interface
where packets will be sent to
.
Select
“
Use the following DNS server addresses
” and then also enter the IP addresses of
Primary DNS server
and
Secondary DNS server.
Click
Next
The page of Network Address translation (NAT), IGMP multicast and MAC Clone settings will
show up and then
WAN Setup Summary
page will show up. Please refer related pages above
for reference. Click
Save
if correct and click
Back
to restart the configuration again.
Bridging
Figure 24: WAN Connection, Bridging Configuration
