X5368r-P3
User’s Manual Version 1.0
121
7.30
VoIP set sip regport
7.30.1 Syntax
voip set sip regport <port>
7.30.2 Description
This command is used to identify the port used by SIP
agents to communicate with the SIP Proxy
server.
7.30.3 Options
The following table gives the range of values for each
option which can be specified with this
command and a default value (if applicable):
Table 10-25:voip set sip regport CLI command
7.30.4 Example
prompt> voip set sip regport 5000
X5368r-P3
User’s Manual Version 1.0
122
7.31
VoIP set sip sendtransport
7.31.1 Syntax
voip set sip sendtransport <tcp | udp>
7.31.2 Description
This command is used to configure the default transport
used for outgoing SIP INVITE requests. It
is not directly related to
tcpPort
and
udpPort
settings used
by SIP and MGCP.
SIP always listens on both TCP and UDP and will accept
connections on either at any time.
The default value is TCP, but some SIP Proxy servers
only support UDP.
7.31.3 Options
The following table gives the range of values for each
option which can be specified with this
command and a default value (if applicable):
Table 10-26:voip set sip sendtransport CLI command
7.31.4 Example
prompt> voip set sip sendtransport tcp
