X5368r-P3
User’s Manual Version 1.0
39
5.5 Security
Click on the
Security
link on the
Configuration
menu. In this
section, you will be able to configure the Security Interface. This
includes the security state, security level, security interfaces,
policies, triggers, and intrusion detection.
Select
Enabled
Security, and then click the
Change State
button
Under the Security Interfaces menu, click on the
Add Interface
link to add a security interface. You will then see the following
screen. Select an interface name (iplan) and interface type
(internal), and then click on the
Apply
button. You will then see
the added interface on the main page.
X5368r-P3
User’s Manual Version 1.0
40
Once again, click on the
Add Interface
button to add an
external interface.
Select an interface name (ipwan) and interface type (external),
and then click on the
Apply
button.
You will then see the added interface on the main page. Click on
the
Enable NAT to internal interfaces
button to enable
Network Address Translation (NAT).
Scroll back up to the Security State section; select
Enabled
for
both
Firewall
and
Intrusion Detection
. Then click on the
Change State
button.
