X5368r-P3
User’s Manual Version 1.0
25
5.3 LAN Connections
Define current LAN services.
Click
Edit.
or
Delete…
link to edit/delete service. When you
would like to edit a new wlan_filtered/ethernet/emux service,
there are four ATM Protocol you can choose: PPPoA, PPPoE,
RFC 1483-Routed, RFC 1483-Bridge and IPoA.
X5368r-P3
User’s Manual Version 1.0
26
Create a new service:
Click the
Create a new service
button to
create Ethernet routed or Ethernet bridged service.
Change Default LAN IP Address:
The default LAN IP interface
is
iplan
, which is shown in the table above. Edit it by using the
Change default LAN port IP address
button below.
After reset the Default LAN Port IP Address, click
Apply
button
to activate it.
Note:
there may be a short pause between clicking
Apply and receiving a response.
