X5368r-P3
User’s Manual Version 1.0
37
5.4.9
PPPoE over Ethernet/Bridge Routed
This service is for Ethernet Bridge/Routed on the wan port.
Click Create a new service to display the type of service.
Select
PPPoE over Ethernet/Bridge routed
and then click on
the
Configure
button
X5368r-P3
User’s Manual Version 1.0
38
Type a description.
Define the
VPI
,
VCI
value to match the DSLAM/ISP setting.
Set
PPPoE Auto Connect
to
Enabled
.
Use WAN IP default setting (0.0.0.0.)
If required enable
Discover IP Subnet from IPCP
and
PPP
IPv6CP
Leave
Access concentrator
and
service name
blank
Leave LLC/HDLC header Mode to
off
.
Select
PAP
and type the
Username
and
Password
and type
idle time
number.
Click on the
Configure
button to confirm the configuration.
