![background image](http://html1.mh-extra.com/html/xantrex/xw4024-120-240-60-xw4548-120-240-60/xw4024-120-240-60-xw4548-120-240-60_installation-manual_3453913089.webp)
Grounding
975-0239-01-01
4–9
This manual for use by qualified personnel only
Disabling Ground Fault Protection for Negative Grounded and Ungrounded Arrays
To install the XW SCC in a system where an external negative-ground bond is required or
where the PV array must not be grounded, the XW SCC internal PV-GFP circuit and
ground bond must be disabled. To disable the unit’s PV-GFP circuit and ground bond,
move the jumper connector located on the circuit board within the wiring compartment.
See Figure 4-7.
Disabling the PV-GFP circuit in this way opens the negative-to-ground bond within the
unit. This provides the option of using an external PV-GFP circuit, operating the XW SCC
with an ungrounded PV array, or grounding the negative circuit of the battery elsewhere in
the system.
Figure 4-6
XW Solar Charge Controller Safety Ground Connector
WARNING: Shock Hazard
Disconnect PV and battery circuits before removing the grounding connection or before removing
or installing the PV-GFP fuse.
xantrex
Solar Charge Controller
Chassis ground terminals.
The PV-GFP fuse is located under the power
connector circuit board
This symbol identifies the
protective conductor
(grounding) connection.
WARNING: Fire Hazard
Ensure there is no other ground connection in the DC
wiring or the PV-GFP will be defeated and will not
protect the array from ground fault conditions.
WARNING: Shock Hazard
Disconnect PV and battery circuits before accessing the XW SCC wiring compartment.
Summary of Contents for XW4024-120/240-60, XW4548-120/240-60,...
