![background image](http://html1.mh-extra.com/html/xantrex/xw4024-120-240-60-xw4548-120-240-60/xw4024-120-240-60-xw4548-120-240-60_installation-manual_3453913027.webp)
Pre-Installation
975-0239-01-01
2–3
This manual for use by qualified personnel only
Removing Internal Faceplates in the Power Distribution Panel
Clearance Requirements
Provide a minimum clearance of 6 inches (15 cm)—12 inches is preferred—around the
top and 6 inches (15 cm) at the bottom of the inverter for ventilation. There must be at
least three feet of clearance in front of the inverter. Ensure that the vents are not obstructed
with foreign objects and that the minimum clearances are met.
Figure 2-2
Removing the Internal Faceplates on the Power Distribution Panel
To remove the upper faceplate,
remove the 4 screws holding the
plate in place.
To remove the lower faceplate,
remove the 4 screws holding the
plate in place.
Figure 2-3
Clearance Requirements
Summary of Contents for XW4024-120/240-60, XW4548-120/240-60,...
