![background image](http://html.mh-extra.com/html/xantrex/xw-mppt60-150/xw-mppt60-150_owners-manual_881370024.webp)
Installation
2–4
975-0400-01-01
Table 2-2
Minimum Clearance Requirements
Location
Minimum Clearance
Above
6 inches (150 mm). When units are mounted in a vertical stack, the topmost
unit must maintain the minimum clearance to the nearest surface.
Note:
Minimum clearances can be ignored when mounting two units on the
side of the XW Power Distribution Panel (part number 865-1015). For more
information, see the
XW Power System Installation Guide
, available with the
XW Hybrid Inverter/Charger. Other installations must follow the guidelines
in this Owner’s Guide.
In front
Sufficient room to allow for easy access to read the display, to prevent
accidental contact with the heat sink, and to perform maintenance.
On sides
6 inches (150 mm) on at least one side of the overall assembly. A maximum
of two units can be mounted side by side or side mounted against an XW
Power Distribution Panel. In both configurations, the minimum clearance
around the outermost unit must be maintained.
Figure 2-1
Minimum Clearance Requirements
6 inches (150 mm) on top and side(s)
Summary of Contents for XW-MPPT60-150
