![background image](http://html.mh-extra.com/html/xantrex/xw-mppt60-150/xw-mppt60-150_owners-manual_881370008.webp)
Safety
vi
975-0400-01-01
•
Remove all jewelry before working with batteries.
•
Never work alone. Have someone assist you with the installation or be close
enough to come to your aid when working with batteries.
•
Always use proper lifting techniques when handling batteries.
•
Always use identical types of batteries.
•
Never install old or untested batteries. Check each battery’s date code or label
to ensure age and type.
•
Batteries should be installed in a well-vented area to prevent the possible
buildup of explosive gasses. If the batteries are installed inside an enclosure,
vent its highest point to the outdoors.
•
When installing batteries, allow at least 1 inch of air space between batteries
to promote cooling and ventilation.
•
NEVER smoke in the vicinity of a battery or generator.
•
Always connect the batteries first, then connect the cables to the inverter or
controller. This will greatly reduce the chance of spark in the vicinity of the
batteries.
•
Use insulated tools when working with batteries.
•
When connecting batteries, always verify proper voltage and polarity.
•
Do not short-circuit battery cables. Fire or explosion can occur.
•
In the event of exposure to battery electrolyte, wash the area with soap and
water. If acid enters the eyes, flood them with running cold water for at least
15 minutes and get immediate medical attention.
•
Always recycle old batteries. Contact your local recycling center for proper
disposal information.
FCC Information to the User
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a residential environment. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with
the instruction guide, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the
following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and the receiver.
•
Connect the equipment to a different circuit from that to which the receiver is
connected.
•
Consult the dealer or an experienced radio/TV technician for help.
Summary of Contents for XW-MPPT60-150
