![background image](http://html1.mh-extra.com/html/xantrex/xhr-100-10/xhr-100-10_operating-manual_881551017.webp)
Revision A
15
Section 1. Features and Specifications
Description
The 1000 watt DC output power supplies provide low noise, precisely regulated,
variable DC output. Typically they are used for bench and automated test equipment
(ATE) applications. Each unit includes over voltage protection and thermal
shutdown as standard features. Universal AC input allows you to use line voltages
globally without resetting switches or adding options. Built-in power factor
correction gives you full output power from low current/low voltage outlets, reduces
power line interference, and allows you to meet international regulations.
You can select from several remote control choices for either analog or digital
control. For analog control, choose from standard analog control or optional
4-channel isolated programming. Digital control options include RS-232 control or
GPIB programming. You can use the power supply on your benchtop or rack
mounted; each supply occupies less than 3-1/2 in. (2 U) of vertical space. Whether
you are powering batteries, development circuits, and magnet coils or running ATE
systems, the power supply provides the precision and power that you need.
Features and Options
•
Models available with voltage ranges from 0-7.5 Vdc to 0-600 Vdc; current
ranges from 0-1.7 A to 0-130 A.
•
Internal power factor correction allows operation from a standard 120 Vac, 15 A
outlet.
•
Thermal shutdown, latching or auto reset.
•
Front panel control of Over Voltage Protection (OVP).
•
Simultaneous digital display of both voltage and current.
•
Ten-turn front panel voltage and current controls for high resolution setting of
the output voltage and current from zero to the rated output.
•
Automatic mode crossover into current or voltage mode.
•
Front panel push button control of output standby mode, and preview of voltage,
current, or OVP set points. Front panel LED indicators for voltage and current
mode operation, OVP, remote programming mode, and shutdown.
•
Multiple units can be connected in parallel or in series to provide increased
current or voltage.
TM-XROP-01XN.book Page 15 Monday, March 22, 2004 4:10 PM
Summary of Contents for XHR 100-10
