![background image](http://html1.mh-extra.com/html/xantrex/xhr-100-10/xhr-100-10_operating-manual_881551021.webp)
Features and Specifications
Rear Panel Connectors and Switch
Revision A
19
Figure 1.3
Rear Panel with High Voltage Output Connector
(For 60 V to 600 V models.)
SW1
Programming
Switch
The SW1 Programming, Monitoring, and Shutdown Select switch is an 8-position
piano DIP switch located on the power supply’s rear panel. The SW1 switch enables
you to choose:
•
Output voltage and current limit programming scales
•
Output voltage and current monitor scales
•
Remote shutdown circuit logic
•
Resistive programming of output voltage or current limit
•
Over temperature shutdown mode
The power supply is shipped with the SW1 switch set in the default operating
configuration, as illustrated in
Figure 1.4
.
Figure 1.4
SW1 Programming Switch
(Shown in its default configuration.)
100/120/200/240V
50/60 HZ
1300VA
100/120/200/240V
50/60 HZ
1300VA
Local Sense Wires
(See
page 48
.)
DC Output and Local Sense Connector
(See
page 39
for more information.)
TM-XROP-01XN.book Page 19 Monday, March 22, 2004 4:10 PM
Summary of Contents for XHR 100-10
