Xantrex SW Plus 2524, Owner'S Manual, Page: 31 / 344

Basic Features
976-0043-01-02 1–5
Emergency Power Off (EPO) Option
The Sine Wave Plus offers an Emergency Power Off (EPO) option
through the use of the EPO Port. The EPO feature is designed to shut
down the inverter from a remote location (or switch).
Since the type of the switch will be dependent on the installation, EPO
switches are not provided with the
Sine Wave Plus . However, many
commonly available emergency shut off switches will work with the Sine
Wave Plus EPO. Consult your local system designer or qualified
technician for assistance.
The EPO is connected to the Sine Wave Plus with a telephone cord
(RJ11type connector) to the dedicated EPO port on the AC (left) side of
the inverter.
See Appendix G, “Emergency Power Off Switches” for additional
information about this feature and how to prepare a cable for it.
Certification Label
The Sine Wave Plus has been tested to nationally recognized safety
standards and has been found to be free from reasonably foreseeable risk
of fire, electric shock, and related hazards when installed and operated in
accordance with all the instructions provided in this manual and in
accordance with all applicable local and national codes.
Please refer to the Certification Label affixed to the AC side of the
inverter for specific agency information.
See Figure 1-3, “The AC side of the Sine Wave Plus” on page 1–4 for the
location of this information.
Figure 1-4 Certification Label
Model Number
Date of
Manufacture
Certification
Statement