Installation
The Installation Guide provides detailed information for installing the
RS3000 Sine Wave Inverter/Charger and the battery temperature
sensor, wiring the inverter/charger to the AC and DC circuits, and
connecting the inverter/charger to the Xanbus® system.
The RS3000 is a Xanbus-enabled device that typically powers the
Xanbus system.
For information on installing the Xanbus system, see
the
Xanbus System Installation Guide
which
is available for download
at
www.xantrex.com
This Installation Guide provides:
•
safety instructions that must be observed during installation
•
a typical Xanbus system diagram
•
information on additional AC and DC components required
•
a list of installation tools and materials
•
detailed procedures for a typical installation
•
installation testing procedures
•
battery information
For information on operating the RS3000, see the
RS3000 Sine Wave
Inverter/Charger Operation Guide.
Summary of Contents for RS3000
