![background image](http://html.mh-extra.com/html/xantrex/rs3000/rs3000_installation-manual_881442051.webp)
Installation
975-0171-01-01
35
Step 7: Performing Checks Prior to Initial Start-Up
Before testing your installation, ensure these conditions are met:
p
Chassis and AC grounds are properly installed.
p
AC input connections and AC output connections are wired correctly on the
terminal block and not reversed.
p
Positive (+) battery cable is connected to the positive (+) battery terminal
through the DC fuse and disconnect switch or DC circuit breaker.
p
Negative (–) battery cable is connected to the negative (–) battery terminal.
p
Battery voltage is within the proper range for this unit
(10.3–15.3 volts DC).
p
DC disconnect switch or breaker is turned off.
p
AC input and output breakers are turned off.
p
All connections are tight.
Summary of Contents for RS3000
