RC7 & RC7GS Remote Controls
5.
Begin Gen Quiet and End Gen Quiet
The period of time during which the generator is prevented from starting
automatically can be defined using the RC7GS.
To specify the begin quiet time, scroll to the Begin Gen Quiet: 00:00
by using the UP and DOWN arrow push-buttons. Set the Begin Gen Quiet start
time. The selected digit for hours or minutes will be underlined and highlighted
(refer to the Set Clock section for details on setting the time).
Figure 30
Start Generator Quiet Time
Press the DOWN arrow to access the End Gen Quiet: 00:00 menu and
select the appropriate end time.
Figure 31
End Generator Quiet Time
NOTE: If the generator is running at the begin quiet time, it will be shut down
automatically. If the auto-start parameters are met during quiet time, the buzzer
will sound and the LCD displays the message “Gen Quiet Fault.” The generator
will start automatically at the end of the quiet time.
Begin Gen Quiet
0
0
:00
End Gen Quiet
0
0
:00
NOTE: Setting begin and end time to 00:00 defeats the quiet time mode.
17
3.0 OPERATION
Summary of Contents for RC7 - REV 1
Page 47: ...RC7 RC7GS Remote Controls...
