RC7 & RC7GS Remote Controls
6
3.
Inverter LED
The green Inverter LED indicates the inverter is switched ON and ready to
provide backup power. If there is no AC power, the inverter LED will be ON solid,
indicating that the inverter/charger is in the inverter (ON) mode.
Inverter LED
Other LEDs or Devices
Meaning
ON (solid)
Inverter ON
Flashing
Charge LED (flashing)
Inverter ready (charging)
Slow Flash
Load Sense Searching
Flashing
Error LED ON + Buzzer
Inverter Error
OFF
Inverter Switched OFF
4.
Charge LED
The Charge LED indicates the current battery charge mode.
Charge LED
Other LEDs or Devices
Meaning
ON (solid)
Bulk Charging
Slow Flash
Absorption Charging
Fast Flash
Batt. Full LED ON
Float Charging
Very Fast Flash
Equalize Charging
OFF
Inverter Mode (no charging)
5.
Batt. Full LED
The Batt. Full LED indicates the state of charge on the batteries. This LED
will not illuminate until the batteries have charged up to at least 90%. The
duration of the LED’s ON time will increase until the batteries reach 100%, which
at that time, the LED will be ON solid. In the inverter mode, the OFF time
duration of the LED will increase until the batteries discharge to below 90% at
which time the LED will extinguish.
Batt. Full LED
Other LEDs or Devices
Meaning
Solid
Battery Fully Charged (100%)
Flashing
Battery Charged 90% or
higher
OFF
Battery Below 90% Charge
6.
Error LED
The Error LED indicates that there is a problem with the inverter/charger or
batteries. Check the LCD display to find and correct the nature of the problem.
Error
Other LEDs or Devices
Meaning
ON (solid)
Check System
3.0 OPERATION
Summary of Contents for RC7 - REV 1
Page 47: ...RC7 RC7GS Remote Controls...