13
Optional PathMaker Remote
Using the PathMaker Remote
Control Panel
The PathMaker Remote switch
is normally left in the
AUTO
position. In this position the
power
switch(es)
are
energized (connecting the
batteries together) when the
Connect voltage is reached,
and de-energized below the
Disconnect voltage.
To
disable
the PathMaker
place the switch in the
O
Momentarily press switch in
MANUAL ON position to turn on
power switch(es).
[
OFF
] position. In this position the battery banks are separated. The
yellow Disabled light is ON.
To
manually
energize the PathMaker power switch(es), momentarily
press and hold the switch to the
I
[
ON
] position until the green ON
light is lit (about one second). This connects the batteries for five minutes.
Moving the switch momentarily to the ON position for at least one
second will cancel the five-minute connect timer.
We highly recommend using the
optional
Remote Control Switch to
provide a clear indication of the PathMaker status and to simplify
emergency starting. Please contact your dealer to purchase the
Remote Control Switch panel.
Emergency Starting
If you cannot start the engine, momentarily press the Manual On
switch. The PathMaker then connects all batteries together (for five
minutes) to provide maximum starting power.
To disable PathMaker
switch to off position.
Summary of Contents for PathMaker
Page 18: ...18...