Installation
975-0126-02-01
49
Preparation for Cleaning Batteries
Dirty batteries can leak current and tend to run hotter. Ultimately, this affects the
performance of your inverter/charger, resulting in inefficient inverting and
incomplete charging. Cleaning batteries when necessary is easy and safe when
you follow these instructions.
Gather what you need before beginning the procedure. The appropriate clothing,
tools, equipment, and supplies are listed as follows.
Clothing
Appropriate clothing could include old clothes, rubber boots, or old shoes. Battery
acid is highly corrosive, so wear something you can discard just in case you splash
some acid on yourself. Be sure to wear rubber gloves and eye protection.
Tools
❐
Adjustable wrench or appropriately sized ratchet and sockets for battery
terminals
❐
Adjustable and/or locking pliers
❐
Torque wrench (suggested, not required)
❐
Soft-bristled brush (a discarded toothbrush works fine)
❐
6" scrub brush
❐
Inexpensive 1/2" chip brush or soldering brush
❐
Hydrometer
Equipment
❐
Eye protection
❐
Rubber gloves
❐
Water hose with spray nozzle or five gallon watering bucket
❐
Empty spray bottle
Supplies
❐
Baking soda (Always keep on hand in the event of a spill.)
❐
Hand cleaner or soap
❐
Towel
❐
Liquid neoprene or white lithium grease (Available at automotive parts stores,
battery suppliers, RV and marine stores.) Use only after reattaching cables.
Summary of Contents for MS2000
