Installation
26
975-0126-02-01
6.
Before proceeding, check that the cable polarity is correct: POSITIVE (+) on
the inverter/charger is connected to the POSITIVE (+) on the battery, and
NEGATIVE (–) cable is connected to the NEGATIVE (–) terminal on the
inverter/charger.
7.
Connect the other end of the NEGATIVE (–) cable to the NEGATIVE (–)
terminal on the battery.
8.
Use a wrench to tighten the bolt to a torque of 15–16 ft-lbs (20.4–21.7 Nm
)
at
the inverter/charger
end.
9.
Attach the DC terminal covers using the screws provided to protect the DC
terminals, as shown in Figure 8.
Figure 7
DC Cable Connections
Important:
The next step is the last cable connection you need to make. A spark is
normal when this connection is made.
Figure 8
DC Terminal Covers
Summary of Contents for MS2000
