![background image](http://html1.mh-extra.com/html/xantrex/freedom-xc-pro-series/freedom-xc-pro-series_owners-manual_3223623062.webp)
Marine Installation
46
Freedom XC PRO Owner's Guide
Marine Installation
illustrates a typical marine installation with the following
components:
1
20-pin harness accessory
2
Equipment ground – Engine negative bus / DC ground bus
3
Freedom XC PRO
4
DC fuse/disconnect/DC circuit breaker
5
12V deep cycle battery bank and protected by a DC fuse in the positive
cable
6
Battery isolator
7
DC alternator
8
To engine
9
Equipment ground – Engine negative bus / DC ground bus
10
Starting battery
11
AC load panel with branch circuit breakers that supply only loads that run
off the Freedom XC PRO
12
AC source panel that includes a max 30A (Freedom XC PRO 2000), 50A
(Freedom XC PRO 3000), or a 20A (if using a GFCI) circuit breaker that
supplies the Freedom XC PRO
13
Shore power – AC power supplied from a shore power connector
Not
shown
Drip shield (see next page)
Figure 20 Typical Marine Installation
1
11
13
12
3
5
4
10
8
9
7
6
2