![background image](http://html2.mh-extra.com/html/xantrex/freedom-x-1200/freedom-x-1200_owners-manual_5001478048.webp)
Basic Installation Procedures
46
Freedom X 1200 Owner's Guide
6. Set the two screws aside.
7. Unpack the customer-supplied GFCI receptacle and lay out
the GFCI unit and the two mounting screws. See
Fault Circuit Interrupters (GFCIs) on page 33
for information
on compatibility.
8. Using the labeled diagram in
, terminate
the wires with straight or spade ferrules and connect the
wires to the correct terminals.
9. Replace the wiring compartment cover (using a #2 Phillips
torque screwdriver - see WARNING), if you are finished with
connecting all the AC wires in the unit.
WARNING
ELECTRICAL SHOCK HAZARD
Use a torque screwdriver to tighten the captive nut panel screw to
5 in-lb (0.56 N-m) torque of force to ensure a proper ground
connection and a required tool access to the wiring compartment.
Failure to follow these instructions can result in death, serious
injury, or equipment damage
.
10. End of
.
Summary of Contents for Freedom X 1200
Page 2: ......
Page 26: ...This page is intentionally left blank 2...
Page 82: ...This page is intentionally left blank 2...