975-0784-01-01
35
This
section for use by
qualified per
sonnel
only.
Marine Installation
Figure 7 illustrates a typical marine installation with the following
components:
1. AC power supplied from a shore power connector
2. An AC source panel that includes a max 30A (or a 15A if using
a GFCI) circuit breaker that supplies the Freedom XC
3. An AC load panel with branch circuit breakers that supply only
loads that run off the Freedom XC
4. Engine negative bus / DC ground bus
5. DC power supplied by a battery bank and protected by a DC
fuse in the positive cable
6. Battery isolator
7. DC alternator
8. Starting battery
9. Drip shield (see next page)
Figure 7
Typical Marine Installation
C Fuse /
disconnect or
circuit breaker
12V Deep Cycle
Battery
Starting Battery
D
AC Load Panel
AC Source Panel
Shorepower
Freedom XC Series INV-CHG Owners Guide.book Page 35 Wednesday, June 7, 2017 3:13 PM
Summary of Contents for 817-1050
