975-0784-01-01
31
Basic Installation Procedures
This
section for use by
qualified per
sonnel
only.
Description of Ignition Control Features
For information about the features and instructions on changing the
ignition control features, see “Inverter and Charger Operation” on
page 39.
Ignition Auto-
on (
)
This setting allows the inverter to operate (Battery
mode) automatically when an ignition control wire is
connected to the ACC input and a valid ignition
signal is constantly detected. The inverter works in
tandem with the vehicle’s ignition circuit.
Ignition Lock-
out (
)
This setting allows the inverter to operate (Battery
mode) when an ignition control wire is connected to
the ACC input terminal and a valid ignition signal is
constantly detected.
When enabled, you have to manually press the Power
button on the display panel to operate the inverter.
Off (
)
To completely disable the ignition control features do
the following:
1. Set Ignition Control to Off (
) using the Select
buttons on the Display panel.
Freedom XC Series INV-CHG Owners Guide.book Page 31 Wednesday, June 7, 2017 3:13 PM
Summary of Contents for 817-1050
