18
Freedom HF Installation Guide
Basic Installation Procedures
AC Input Connections for the Freedom HF
1800 T
Model
1
1.
Ensure AC and DC power sources are turned off.
2.
Install the required circuit breaker in the AC distribution panel
supplying AC power to the unit.
3.
Connect the female PTI cable connector to the AC IN male receptacle
on the unit.
4.
Connect the other end of the wires to the circuit breaker in the AC
distribution panel supplying AC power to the unit.
AC Input Connections for the Freedom HF 1055 EMS and
Freedom HF 1800 EMS Models
1.
Ensure AC and DC power sources are turned off.
2.
Connect the three-prong plug to an AC wall outlet.
1.For Freedom HF 1800 T (806-1840-01), this connection is for
AC IN
. For Freedom
HF 1800 T (806-1840-03), this connection is for
AC OUT
.
to circuit
breaker
NOTE
: See footnote below.
ELECTRIC SHOCK HAZARD
Do not alter the AC cord and its three-prong plug. The AC cord is pre-
installed and pre-wired to the AC Input terminals of the unit.
Do not connect the plug to other than a properly grounded electrical wall
outlet.
Failure to follow these instructions will result in death or serious
injury.
to wall
outlet
Freedom HF Install Guide.book Page 18 Friday, May 18, 2018 11:38 AM