background image

18

Freedom HF Owner’s Guide

Operating in Shore Power Mode

Turning the Inverter Function On and Off

The Inverter Power button on the display panel turns the Freedom 
HF’s Inverter function ON and OFF. To operate, press the button 
and hold for one second.
When shore power is NOT present and Inverter mode is ON:

the AC outlets will supply power to any attached appliances 
when the Inverter Power button is turned ON and

the AC outlets will not supply power to any attached appliances 
when the Inverter Power button is turned OFF

To prevent unnecessary battery discharge, turn the Inverter Power 
button off when you are not using the Freedom HF.

Inverter Mode Setting is OFF

When the Freedom HF’s Inverter function is turned off (“



”) and 

the AC source is outside the operating range or is disconnected, the 
Freedom HF will not switch to invert mode. This means that even if 
the Inverter Power button is pressed to try and turn inverter function 
on, there will be no power coming from the battery to the AC output 
terminals. Therefore, any appliance connected to the AC output 
terminals will not operate.

Energy Saver 25-hour Automatic Shut Off

a

During invert mode, a 25-hour countdown is initiated when the AC 
load drops to less than approximately 80 watts and remains below 
this level. After 25 hours the inverter automatically shuts off to 
reduce battery discharge and preserve battery life.

ELECTRICAL SHOCK HAZARD

Turning the Inverter mode setting to OFF and/or turning the 
Inverter Power button off do not disconnect DC battery power 
from the Freedom HF. You must disconnect both AC and DC 
power before working on any circuits connected to the Freedom 
HF.

Failure to follow these instructions can result in death or serious 
injury.

a.The feature is available only for Freedom HF 1500 (PN: 806-1544) and Freedom
HF 1800 T (PNs: 806-1840-01, 806-1840-03, and 806-1840-04).

Freedom HF InvChg Owners Guide.book  Page 18  Wednesday, September 13, 2017  6:20 PM

Summary of Contents for 8006-1840-02































































Reviews: