manualshive.com logo in svg

Xantrex 8006-1840-02, Owner'S Manual, Page: 4 / 62

Share
Download
Xantrex 8006-1840-02 Owner'S Manual Download Page 4

ii

Freedom HF Owner’s Guide

About This Guide

Purpose

The purpose of this Owner’s Guide is to provide

 

explanations and 

procedures for operating, maintaining, and troubleshooting a Freedom HF 
Inverter/Charger for Recreational, Fleet Vehicle, or Marine installations. 
For complete information to help in installing a Freedom HF Inverter/
Charger see the installation guide, part number 975-0395-01-01.

Scope

The Guide provides safety guidelines, as well as information about 
operating and troubleshooting the installation. It does not provide details 
about particular brands of batteries. You need to consult individual battery 
manufacturers for this information.

Audience

The Guide is intended for users and operators of the Freedom HF Inverter/
Charger. 

Conventions Used

The following conventions are used in this guide.

DANGER

 indicates an imminently hazardous situation, which, if not 

avoided, will result in death or serious injury.

WARNING

 indicates a potentially hazardous situation, which, if not 

avoided, can result in death or serious injury.

CAUTION

 indicates a potentially hazardous situation, which, if not 

avoided, can result in moderate or minor injury.

NOTICE

 indicates a potentially hazardous situation, which, if not 

avoided, can result in equipment damage.

IMPORTANT:

These notes describe things which are important for you 

to know, however, they are not as serious as a caution or warning.

Freedom HF InvChg Owners Guide.book  Page ii  Wednesday, September 13, 2017  6:20 PM

Summary of Contents for 8006-1840-02































































Reviews:

No comments