manualshive.com logo in svg

Xantrex 8006-1840-02, Owner'S Manual, Page: 15 / 62

Share
Download
Xantrex 8006-1840-02 Owner'S Manual Download Page 15

975-0390-01-01

1

Introduction

The Freedom HF Inverter/Charger (Freedom HF) is designed with 
integrated inverting–charging functions and power management 
features suitable for marine, recreational, and commercial vehicle 
installations.
Please read this chapter to familiarize yourself with the main 
performance and protection features of the Freedom HF.

Materials List

The Freedom HF

 

(PNs: 806-1840, 806-1020) base package includes 

the minimum following items:

•

one Freedom HF unit

•

one set of owner’s and installation guides and a mounting template

•

one display panel with 7-inch (0.17 m) cable

•

one communications cable (25 feet) (7.5 m)

•

two DC terminal covers

•

one strain-relief clamp

•

one GFCI cover plate with knockout

•

one display panel blanking plate (not shown)

•

one display panel mounting bezel (not shown)

•

one set of lock washers and nuts (not shown)

NOTE

: If any of the items are missing, contact Xantrex or any 

authorized Xantrex dealer for replacement. See “Contact 
Information” on page i.
Other Freedom HF OEM models may include other DC and/or AC 
connectors.

Figure 1

What’s In The Box

Display panel is 
attached to the unit.

Freedom HF unit

communications cable

DC terminal covers

GFCI cover plate

strain-relief clamp

Ow

ner

’s G

uid

e

moun

ting t

empla

te

Ins

tall

atio

n G

uide

Product image shown 
may vary from actual 
product. See “Features” 
for comparisons.

Freedom HF 1800 shown.

Owner’s and Installation 
Guides and mounting 
template

Freedom HF InvChg Owners Guide.book  Page 1  Wednesday, September 13, 2017  6:20 PM

Summary of Contents for 8006-1840-02































































Reviews:

No comments