manualshive.com logo in svg

Xantrex 8006-1840-02, Owner'S Manual, Page: 52 / 62

Share
Download
Xantrex 8006-1840-02 Owner'S Manual Download Page 52

38

Freedom HF Owner’s Guide

Troubleshooting Reference

ELECTRICAL SHOCK AND ENERGY HAZARD

Do not disassemble the Freedom HF. It does not contain any user-
serviceable parts. Attempting to service the unit yourself could result in 
an electrical shock or burn.

Failure to follow these instructions can result in death or serious 
injury.

Table 8

Troubleshooting Reference

Problem

Possible Cause

Solution

Battery charging current is lower than the 
charging set point during bulk charge mode.

Ambient (environment) temperature is 
high.

Do not be alarmed, the unit is performing normally. The 
charging current automatically de-rates at high ambient 
temperature.

Improve ventilation. Make sure the unit’s ventilation openings 
are not blocked.

Alarm does not sound when an error is 
encountered.

Alarm is turned OFF.

Press and hold the Select button for two seconds to disable (or 
enable) the audible alarm. See “Display Panel Operation” on 
page 15.

Freedom HF InvChg Owners Guide.book  Page 38  Wednesday, September 13, 2017  6:20 PM

Summary of Contents for 8006-1840-02































































Reviews:

No comments