3. Mount the solar panel.
TIP 1:
Once applied to a surface, any industrial
grade outdoor UV-rated adhesive sealant
cannot be easily removed without damaging
the solar panel.
a.
Unpack the solar panels and prepare all installation tools and
materials.
b.
Prepare the roof mounting surface by removing dust, dirt, and
debris. Clean and degrease the roof surface with isopropyl
alcohol and dry completely.
Figure 2
Precautions
NOTICE
GENERAL PRECAUTIONS
l
Do not bend more than 30° when handling and mounting the
solar panel.
l
Do not step on the solar panel's cells with hard footwear.
Failure to follow these instructions can result in physical
damage to vehicles and property.
c.
For permanent mounting, apply an adhesive sealant (see
TIP
1
) to the solar panel's backside and place the panel on the exact
and intended location. Alternatively, install the solar panel on
the roof using appropriate screws and washers to fasten the
panel.
TIP 2:
If using screws to mount the standard
flex panel, apply a silicon outdoor UV-rated,
waterproof sealant around the screw holes
and on the screw head after fastening to
prevent water ingress into the roof. Contact
the vehicle/vesselmanufacturer for
recommendations on roof sealant.
NOTICE
ADDITIONAL PRECAUTIONS
l
Do not mount the solar panel near other roof fixtures that can
obstruct direct exposure to sunlight.
l
Select the mounting area carefully and mark the exact and
intended location of the solar panel.
Failure to follow these instructions can result in physical
damage to vehicles and property.
d.
Apply an RV roof sealant (see
TIP 2
) to the screw heads.
Figure 3
Two ways to mount the panel
Depends on roof
Torque
material
975-1028-01-01 Rev A
January 2021
5
