Safety Information
Important Information
READ AND SAVE THIS
I
NSTALLATION
G
UIDE FOR FUTURE REFERENCE
.
Read these instructions carefully and look at the equipment to become familiar with the device before
installing, operating, configuring, maintaining, and troubleshooting it. The following special messages
may appear throughout this documentation or on the equipment to warn of potential hazards or to call
attention to information that clarifies or simplifies a procedure.
The addition of either symbol to a “Danger” or “Warning” safety label indicates that
an electrical hazard exists which will result in personal injury if the instructions are
not followed.
This is the safety alert symbol. It is used to alert you to potential personal injury
hazards. Obey all safety messages that follow this symbol to avoid possible injury
or death.
Product Safety Information
c
Before using the solar flex panel, read all instructions and cautionary markings on the solar flex
panel's components, the batteries, and all appropriate sections of this guide.
c
Use of accessories not recommended or sold by the manufacturer may result in injury to
persons, a risk of electric shock, or a risk of fire.
c
The solar flex panel is designed to be connected to your DC electrical systems. The
manufacturer recommends that all wiring be done by a certified PV technician or electrician to
ensure adherence to the local and national electrical codes applicable in your jurisdiction.
c
To avoid a risk of fire and electric shock, make sure that existing wiring is in good condition and
that wire is not undersized. Do not operate the solar flex panel with damaged or substandard
wiring.
c
Do not operate the solar flex panel if it has been damaged in any way.
c
This solar flex panel does not have any user-serviceable parts. Do not disassemble the solar
flex panel except where noted for connecting wiring and cabling. See your warranty for
instructions on obtaining service. Attempting to service the solar flex panel yourself may result in
a risk of electrical shock or fire.
c
To reduce the risk of electrical shock, disconnect the solar flex panel from all devices and or
components before attempting any maintenance or cleaning on the solar flex panel.
c
To reduce the chance of short-circuits, always use insulated tools when installing or working
with this equipment.
c
Remove personal metal items such as rings, bracelets, necklaces, and watches when working
with electrical equipment.
c
Do not ground any PV conductors.
c
Do not install the solar panel on top of a residential structure.
Copyright © 2021 Xantrex LLC. All Rights Reserved. All trademarks are owned by Xantrex LLC and its affiliates.
Exclusion for Documentation
UNLESS SPECIFICALLY AGREED TO IN WRITING, SELLER
(A) MAKES NO WARRANTY AS TO THE ACCURACY, SUFFICIENCY OR SUITABILITY OF ANY TECHNICAL OR OTHER INFORMATION PROVIDED IN ITS MANUALS OR OTHER
DOCUMENTATION;
(B) ASSUMES NO RESPONSIBILITY OR LIABILITY FOR LOSSES, DAMAGES, COSTS OR EXPENSES, WHETHER SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL OR INCIDENTAL,
WHICH MIGHT ARISE OUT OF THE USE OF SUCH INFORMATION. THE USE OF ANY SUCH INFORMATION WILL BE ENTIRELY AT THE USER’S RISK; AND
(C) REMINDS YOU THAT IF THIS MANUAL IS IN ANY LANGUAGE OTHER THAN ENGLISH, ALTHOUGH STEPS HAVE BEEN TAKEN TO MAINTAIN THE ACCURACY OF THE TRANSLATION,
THE ACCURACY CANNOT BE GUARANTEED. APPROVED CONTENT IS CONTAINED WITH THE ENGLISH LANGUAGE VERSION WHICH IS POSTED AT http://www.xantrex.com.
NOTE
: Visit http://www.xantrex.com , click Products, select a Product category, select a Product, and search the Product Documents panel for a translation of the English guide, if available.
Contact Information
Telephone:
+1-800-670-0707 / +1-408-987-6030
Web:
http://www.xantrex.com
Email:
http://www.xantrex.com/power-products-support/
2
975-1028-01-01 Rev A
January 2021
